
For decades, you have been forced to choose
Buy copper, and you polish tarnished metal every evening.
Buy non-stick, and you replace it when the coating peels.
Buy premium multi-clad, and you fund a distribution chain — not better metallurgy.
This is not an engineering limitation. It is a design failure. Viretta engineers the compromise away.
Choose your surface. Or build the complete system
01. 5-Ply Copper Stainless Steel Series
The copper is fully encapsulated within the 2.9mm 5-ply architecture. Zero polishing. Zero maintenance.
02. 5-ply Copper Titanium Plasma Series
A non-reactive, matte-black titanium plasma surface three times harder than stainless steel. No PTFE. No PFAS. Never peels.
What sets it apart
Five Layers. Pure Copper. Even Heat.
Most "premium" pans are 3-ply: a single aluminium core between two layers of steel. Viretta has 5-ply, built around a pure copper core — the fastest, most responsive heat conductor in any kitchen. More layers carry heat further; copper carries it more evenly. Together they bring the entire surface to temperature as one — the even field you see on the thermal camera, edge to edge.
2.9mm 5-ply architecture
Five bonded layers, 2.9mm thick, carry heat across the base and up the full sidewall — not just where the flame hits.
Titanium Plasma surface
Fused into the steel by a plasma arc reaching ~30,000°C — not a coating that can peel. Three times harder than raw stainless steel. Delicate proteins release cleanly with a little oil. No PTFE. No PFOA. Ever.
What sets it apart
No marketing claims. Just material integrity
That copper line in the rim is the whole story: 0.5mm of pure copper, sealed within the five-ply wall. Copper is the most responsive heat conductor in any kitchen — but left exposed, it tarnishes and demands constant polishing. We seal it inside the wall, so you get the performance of copper with none of the upkeep.
Encapsulated copper core
0.5mm of pure copper (~400 W/mK), sealed within the 5-ply wall — the performance of copper, none of the polishing.
HOLLOW STAINLESS HANDle
Hollow-formed stainless steel — less mass, so it stays cooler on the stovetop and balances lighter in the hand. Machined rivets and an ergonomic thumb ridge give you control when tossing a full pan.
Two Surfaces. One Standard Of Performance
5-PLY COPPER CORE — CLASSIC STEEL
Raw SS304 interior. Maximum fond development for an aggressive, even sear. The 2.9mm copper core carries heat edge to edge — no cold spots, no compromise.
TITANIUM PLASMA — LOW-FRICTION SURFACE
Fused into the steel by a ~30,000°C plasma arc — not painted on top. The matte-black micro-texture is three times harder than raw metal.
One System. Fewer Compromises.
Why Choose One Strength When You Can Have More?

Viretta 5-PIy Titanium Plasma
Viretta 5-PIy Stainless steel
All-Clad Copper Core (5-ply)
PFAS Non-stick
Ceramic Non-stick
Carbon Steel
CRAFTED DETAILS
Built To Withstand Inspection
01. The Titanium Plasma Surface
Bonded with a plasma arc reaching ~30,000°C — fused into the steel, not coated on top. Three times harder than raw steel. PTFE- and PFAS-free.
02. The Riveted Handle
Hollow-formed stainless steel, secured with machined rivets — no plastic, no flimsy welds to fail.
03. The Certified Base
Every vessel is laser-engraved with its exact specifications — size, capacity, induction rating.
Manufacturing & delivery
-
The idea
AUGUST 2025
-
Supplier found
SEPTEMBER 2025
-
Design & Development
OCTOBER — DECEMBER 2025
-
Tooling Finalized
JANUARY 2026
-
Tooling completed
March 2026
-
Samples Produced
APRIL 2026
-
Samples Received & Approved
May 2026
-
Pre-launch on Kickstarter
JUNe 2026
-
Launch on Kickstarter
15 AUGUST
-
Mass Production
AUGUST 2026
-
Wave 1 Dispatched
5-Ply Stainless Steel Series DECEMBER 2026
-
Wave 2 Dispatched
5-PLY Titanium Plasma Series FEBruary 2027
Early-Bird FAQ
Why should I sign up for the early-access list?
It’s the lowest price the Viretta 5-Ply Copper Series will ever be. Your founding price is up to 40% off the future retail price — and lower than the public Kickstarter price. Sign up now so you don’t miss the launch on 15 August, and reserve your spot for a fully refundable €1 that’s credited to your final pledge.
What is the Viretta 5-Ply Copper Series?
Every pan is built from five bonded layers — stainless steel, aluminium, a 0.5mm pure copper core, aluminium, and a magnetic steel base — 2.9mm thick in total. Copper is the fastest, most even heat conductor in any kitchen, so the whole surface heats at once: no hot spots, no cold edges. The copper is fully sealed inside the wall, so you get its performance with none of the polishing traditional copper pans demand.
You offer two surfaces — Stainless steel and Titanium Plasma. Which should I choose?
Both share the same 5-ply copper construction and differ only in the cooking surface. Stainless steel has a raw stainless steel (SS304) interior — the professional choice for an aggressive sear and rich fond, and unbeatable for browning meat. Titanium Plasma has a coating-free titanium surface, three times harder than steel, that releases food cleanly with a little oil — easier for eggs, fish and everyday cooking. Many backers choose one of each.
Are the pans non-stick?
It depends on the surface. The Stainless steel pans are not non-stick — they have a raw stainless searing surface, so you use a little oil and proper preheating (the professional way to cook). The Titanium Plasma pans are naturally low-friction: with a little oil, food releases cleanly. Neither uses any chemical non-stick coating.
How can the Titanium Plasma surface release food without any coating?
The release comes from physics, not chemistry. The titanium plasma surface has a microscopic texture that, together with a little oil, forms a thin film between your food and the pan. Because the effect is mechanical and not a chemical coating, it never wears off — it lasts the lifetime of the pan.
Is there PFAS in your pans?
No. No PFAS, no PFOA, no PTFE, and no chemical coatings of any kind — so nothing can flake off and end up in your food. All our food-contact products pass the strict German LFGB safety standard.
Can I use metal utensils?
Yes, on both surfaces. There’s no soft coating to scratch or damage — the cooking surface is solid metal — so metal utensils are completely fine.
What hobs does it work on, and is it oven-safe?
All hobs — gas, induction, electric and ceramic — thanks to the magnetic stainless steel base. The pans are oven-safe up to 320°C.
What sizes will be available?
Stainless steel: 16cm saucepan, 20cm saucepan, 24cm pot, 26cm frying pan, 28cm sauté pan and 30cm frying pan. Titanium Plasma: 26cm frying pan, 28cm sauté pan and 30cm frying pan. You can choose single pieces or bundles.
When will my pans ship?
The Stainless steel series (Wave 1) ships in December 2026. The Titanium Plasma series (Wave 2) ships in March 2027.
How do I clean the pans?
The cooking surfaces are easy to clean and very durable. On every pan the copper core is sealed at the rim, where it forms a thin visible line that can develop a warm patina over time. The stainless body is dishwasher-safe, but we recommend hand-washing to keep the copper edge bright — a quick wipe restores the shine.
Can I cook without oil?
We recommend a little oil or fat on both surfaces — it’s needed for the best release on the Titanium Plasma pans, and for the best sear on the Stainless steel pans. A small amount is all it takes.
How heavy are the pans?
Viretta’s 5-ply pans are substantial but balanced, and the hollow stainless handle keeps the weight comfortable.
Do you offer a warranty?
We do! We offer a lifetime warranty on manufacturing defects on all of our products.
How does Kickstarter work — and what if the campaign isn’t funded?
Kickstarter is a platform where new products are brought to life by their first supporters (“backers”). By launching there we ship directly from our production to you — no middlemen, no retail markup — which is how we can offer the founding price. You pledge when we launch on 15 August, and your card is only charged if the campaign reaches its goal. If it doesn’t, no one is charged, and your €1 reservation is fully refundable either way.
When will the pans be available in your webshop?
After all Kickstarter rewards are fulfilled, the collection will be available through viretta.dk and our stores — at the full retail price. The founding price is only available during the Kickstarter campaign.
I have a question!
We’re happy to help — email us at info@virettacookware.com and we’ll get back to you within a few days.
Secure your Early Bird access before the campaign opens.
The Early Bird tier — 30 to 40% off future retail pricing — is available only in the first 48 hours after launch.
RESERVE FOR €1 — LIMITED SPOTS- Limited slots
- Up to 40% off retail price
- Early access link
- €1 toward final pledge
























